|
The fiberglass cloth also gets saturated with epoxy in the same proportion as the carbon cloth (1:1 by weight). Measure and mix the correct amount of epoxy and hardener and place your fiberglass cloth atop another piece of plastic sheet. Before you transfer the ’glass onto the dry carbon-fiber sheet, wet the carbon with a little epoxy to help the ’glass stick to it. Then flip the plastic sheet over and transfer the fiberglass onto the carbon fiber. Squeegee in the same manner as you did the carbon fiber. Let the ’glass dry, and repeat the process with your other fiberglass layer(s). View Related Article
|
|