|
When we reached the plastic body filler on both quarter-panels, we left it in place so we wouldn't have to do as much work filling it all back in. As you will see, we eventually removed almost all the filler, which turned out to be much thicker than necessary. The car was fairly straight with no major flaws, so McGann smoothed the panels by sanding more and adding a very small amount of filler to do the same job. Major dents would require sheetmetal work, but these waves were easily addressed by smoothing them with filler. Filler is reusable as long as it is not cracked or heavily pitted, and you can also add more over existing material. Small pinholes can be repaired with spot putty or glaze as a final layer. View Related Article
|
|