Build a TH200-4R For 1,000 HP
|
The stock overdrive clutch assembly uses three steels and two clutch plates. By removing 0.080 from the overdrive apply piston (pen points), Carr can add a third clutch plate for a 33 percent increase in torque capacity. Unlike a 700-R4, the 200-4R is not prevented by its valvebody program from running in Overdrive at wide-open throttle. The extra clutch capacity assures your 502 Rat motor won't overpower the clutch in triple-digit Cannonball Run mode. View Related Article
|
|