The air cleaner assembly is a restriction. Since this is a routine tune-up, we used a paper filter and the stock assembly so we could get an accurate stock baseline. We recommend using a K&N high-flow filter instead of the paper stuff.The air cleaner assembly is a restriction. Since this is a routine tune-up, we used a pape After the tune-up, we sprayed off most of the glued-on goo and aired up the tires for some burnouts.After the tune-up, we sprayed off most of the glued-on goo and aired up the tires for some The stock column also needs some work. The GM tilt mechanism always loosens up, causing the wheel to float around in your hands. We'll fix that when we do the interior.The stock column also needs some work. The GM tilt mechanism always loosens up, causing th Tools!Aside from a good spark plug gapper, you'll need a Chevrolet (9/16-inch) distributor wrench to access the hold-down bolt. It is also good to have a test light, a ratchet with a 5/8-inch socket with a swivel, and the various screwdrivers and nut drivers needed to get the distributor cap apart. ENDTools!Aside from a good spark plug gapper, you'll need a Chevrolet (9/16-inch) distributor Needs suspension bushings It's still not great, but at least it grabs a little bit of tire smoke now. Next stop, some exhaust.It's still not great, but at least it grabs a little bit of tire smoke now. Next stop, som SOURCES B&C Auto Parts Gardena CA Justice Bros. www.justicebrothers.com « | 1 | 2 | 3 | View Full Article By Douglas R. Glad Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
