RPM Dyno Test - Run Huge Nitrous On Your Street Machine

Mega Power
Test 1 used an Edelbrock Torker single-plane manifold, a Holley 750 HP carb, a Lunati flat-tappet hydraulic cam, and , and 171/48-inch Hooker Super Comp headers

Test 2 consisted of the 370-inch AMC mill with two Race Demon 650TRs and the Hogan's manifold. Jetting was 71 in the primaries and 72 in the secondaries.

For Test 3 we added a shot of nitrous oxide with 22/24 nitrous/fuel jetting with 28 degrees of timing.

For Test 4 we added a bigger shot of nitrous with 25/28 nitrous/fuel and the same timing.

	TEST 1		TEST 2		TEST 3		TEST 4
RPM	TQ	HP	TQ	HP	TQ	HP	TQ	HP
4,000	413	316	425	324	420	320	421	320
4,100	414	323	425	332	420	328	419	327
4,200	414	331	426	341	421	337	419	335
4,300	418	342	428	351	423	347	421	345
4,400	420	352	433	363	426	357	425	356
4,500	424	363	436	373	429	367	429	368
4,600	426	373	436	382	427	374	426	373
4,700	426	383	438	392	427	382	427	382
4,800	427	390	438	400	427	390	427	390
4,900	428	400	438	408	427	398	427	399
5,000	430	409	439	418	427	406	433	412
5,100	431	418	440	427	432	420	433	421
5,200	431	427	438	433	639	632	450	445
5,300	429	433	436	440	635	641	668	674
5,400	428	440	434	446	631	649	656	675
5,500	424	444	429	450	613	642	646	676
5,600	421	449	424	452	594	633	638	680
5,700	415	450	420	456	581	630	629	683
5,800	411	454	417	460	569	628	621	686
5,900	408	458	415	466	557	625	614	690
6,000	402	460	412	471	547	625	605	692
6,100	400	465	408	474	538	625	598	695
6,200	393	464	402	474	528	623	585	690
6,300	386	463	394	473	517	620	573	687
6,400	380	463	388	473	506	617	562	685
6,500	372	461	379	469	495	613	393	487