This is the car we drooled over: a '70 Javelin owned by Dennis Allen. He pulled the 304 an
We wanted a Javelin bad. So we got all squinty and slack-jawed when we found a bunch of other Javelin guys on eBay bidding our Big Bad Blue '69 1/2 Go Pack dream car to death. Losing that auction got us thinking about the "wrong year" Javs and Ramblers we could buy cheap and plumb with beefed AMC running gear. Since our requisite engine for any AMC street machine is the 401, we went looking for alternative body styles that weren't coveted or even marginally collectible so we wouldn't feel guilty about yanking the stock engine for a big-cube swap-o. We didn't rule out the larger but still kick-butt Ambassador series or the Rebel, the big 'ol Marlin, or even the gas-crunch stuff from the '70s. We looked at models built after 1965, because stuff before that was just weird, and before 1977 when the Concord hustled in the age of the luxury compact that led to the ultimate demise of the auto division. Ugh.
So here's the deal: We dug up some archive photos of the cool musclecar-era body styles and listed some of the parts, tips, and tricks we found in our AMC fervor. There is way more information available than we can put in this story. So consider this a primer on what is possible. We're still trying to decide which one is coolest, so if we score a roller, we'll unite it with a screamin' mill and let you know.
The alternative is this '74 Javelin owned by 19-year-old Brian Layden. It uses a 0.030-ove
Like we said, the dream was buying a '68-'69 Javelin SST or AMX with a four-speed and either the 343ci or 390ci engine. Great cars, but we couldn't even find a rusty one that would make a good base for a street machine. Everything we found was either restored and expensive or returning to ore. During our search, we did find some Rambler Americans that came equipped with the small V-8s from the 290-360 family. Since the external engine dimensions are the same as the 401, a swap would be easy and their light weight would make them fly. We also found several of the less-coveted '71-'74 Javelins at reasonable prices and a Rambler Rebel SST convertible. Many of these cars were for sale for less than $4,000. Check out the cool bodies and consider the options.
All 290-401 AMC V-8s after 1966 are in the same family. But just because the 390-401s have the same dimensions as the smaller 290-360 engines doesn't mean you can bore and stroke your way to any cubic-inch displacement with any block. There are differences internally. The most notable is the switch from 7/16-inch head bolts to 1/2-inch head bolts and the deck height increase from 9.175 to 9.208 inches in 1970. This is actually OK because most of the aftermarket parts we've found are designed for post-'70 401s found in fullsize AMC passenger cars until 1974 and in fullsize Jeeps through 1978, making them more plentiful than the early engines.
The Rambler American got a redesign in 1965 and eventually morphed into the SC/Rambler 390
Most of the AMC V-8 cars were saddled with the ill-reputed 8 7/8 Model 20 rearend. The problem has always been that the axle is a separate component from the hub. To make matters worse, the axle uses a Woodruff key instead of splines, creating a potential to spin the axles in the hub and snap the key. Short of changing rearends, the fix we've seen used universally is a Detroit Soft Locker, Auburn differential, or similar design with a Moser one-piece 29-spline axle to put up with the abuse. If you're going racing with 500 hp or more and launching hard on slicks, there are Dana 60 and Ford 9-inch bolt-in housings available. Otherwise, upgrade the 20 and leave it alone.
Early AMCs came equipped with the Borg-Warner Shift Command automatic or the T10 four-speed on the performance models. The T10 has always been a decent piece, but the Shift Command automatic shifts poorly and has little or no aftermarket support for performance use. The reason is that after 1972 you could get the TorqueFlite 727 Chrysler transmission with an AMC bolt pattern from a fullsize Jeep or AMC passenger car. With the door open to all the mainstream Chrysler speed goodies like converters, shift kits, and shifters, it's no wonder the early automatic is more for pleasant street cruising while the 727 is used for Friday night drag racing.
AMC thought of building a sleeper out of a Rambler American in 1966. The company packed in
We can't forget the Rebel. This '67 Rambler Rebel SST was available with a few different V
The 401 cranks and rods are forged and tough enough for a performance rebuild. Look for th
This is a stone-stock 401 from a '78 Cherokee. If you know what you're looking for, it isn
The easy way, of course, would be to pick up a catalog and order the 727 or even a 904, a converter, and a shifter and call it done. But if you're into it, Advance Adapters has an adapter to retrofit any GM trans, including overdrives.
The standard transmission is a bit more straightforward; if you're lucky enough to score a four-speed T10 car, leave it in there. It also should be known that the T5 five-speed from late-model Mustangs and Camaros can be used with the stock bellhousing from the 401 AMC V-8. With a pilot bushing or flywheel swap, both are acceptable for performance applications.
Finally, the dress-up. Unlike Big Three cars, AMC used the 5-on-4.5 bolt pattern on all its musclecar-era cars. This happens to be the same bolt pattern as Ford and Chrysler, so swap meets and any of the huge number of wheel makers can provide rims for an AMC. Also, because of the Jeep guys, you can score about any part for the engine in chrome. All good, just don't overdo it.
After 1970, the 390/401 engines had dog-leg exhaust ports. Early text suggests they flowed
Although these engines are from the same family, they share external dimensions only. Left
This is the Model 20 that you get with a V-8 AMC. It's got a bad reputation, but with the
Here is the problem with the Model 20. The axle passes through the hub and is attached wit
The TorqueFlite 727 has an AMC bolt pattern after 1972. These can be rebuilt using the sta
Everything you see here is off-the-shelf for the AMC. This 401 has an Edelbrock Air Gap in
We found several cars hidden in a warehouse right here in Los Angeles. Know what they are? Log on to carcraft.com if you think you do.
Advance Adapters Inc.
2700 California St.
Auburn Gear Inc.
Reider Racing (Precision Gear)
151 Industrial Dr.