Car Craft Magazine Homepage

Custom Dash Gauge Cluster Tap

The stock circuit board was a fire hazard on the Rambler, so it was tossed. The factory mounting holes were then repaired, if needed, tapped with a 3/16 bit, and fitted with studs to mount the bracket we were about to build.
How To Build a Trick Dashboard

The stock circuit board was a fire hazard on the Rambler, so it was tossed. The factory mounting holes were then repaired, if needed, tapped with a 3/16 bit, and fitted with studs to mount the bracket we were about to build.  View Related Article