Paxton's 150 Fuel-Pump Kit - Fuelish Pleasures
After the Paxton fuel pump is installed and the fuel lines are attached, begin wiring the electric pump. Here, wire terminals are crimped onto the fuel-pump wires. You'll need to get 12 volts of power from a source that's regulated by the ignition switch--specifically, a source that doesn't deliver power once the key is in the "off" position. See the enclosed wiring diagram for specifics. It would also be a good idea to wire the pump to an oil-pump switch that will turn off the pump in the event of an accident View Related Article
|
|