The Rad Rides crew installed the motor in the stock position to determine engine-height. A Discovery Channel camera crew showed up to film all the action for an upcoming program.The Rad Rides crew installed the motor in the stock position to determine engine-height. A With everything square, the engine brackets with the sleeves welded in the lower position...With everything square, the engine brackets with the sleeves welded in the lower position. ...are attached to the lower-control-arm support using factory holes. Lower and upper intakes are installed with 1-inch spacers to demonstrate how high the motor sits in the engine compartment in its stock location.Lower and upper intakes are installed with 1-inch spacers to demonstrate how high the moto The stock transmission crossmember wouldn't work with the new motor location, so the Rad Rides crew fabricated a custom version.The stock transmission crossmember wouldn't work with the new motor location, so the Rad R Vintage Air supplied the mounting brackets for the A/C pump (lower right). Troy had to fabricate a third mount for the alternator, along with a custom water-pump pulley to ensure everything fit properly.Vintage Air supplied the mounting brackets for the A/C pump (lower right). Troy had to fab « | 1 | 2 | 3 | » | View Full Article Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
