Car Craft Magazine Homepage Car Craft

Installing A Distributor Draw Small Circle On Housing

Installing A Distributor Draw Small Circle On Housing
Installing a Distributor - How To Stab A Distributor
Before the distributor is completely removed from the engine, draw a small circle on the housing to indicate the new location of the rotor. It's usually an inch or so from its original position. This mark tells you where to set the rotor before you stab the distributor back in. View Related Article
Installing A Distributor Disconnect Battery Installing A Distributor Swapping Points Electronic Distributor Installing A Distributor Mark The Location Of The Rotor Installing A Distributor Twisting The Housing Installing A Distributor Draw Small Circle On Housing Installing A Distributor Perform Repairs Installing A Distributor Rotor Twist Back
Installing A Distributor Engine Cranked Installing A Distributor Install Distributor Installing A Distributor Thumb Over Spark Plug Installing A Distributor Pop A Valve Cover Installing A Distributor Compression Stroke Installing A Distributor Marking Installing A Distributor Rotor

 

Chevy Corvette Research
Chevy Corvette Explore the world with a new Chevy Corvette. Compare the Corvette with other submodels and find all you need for your car buying needs. It has had 0 vehicle recalls, which can give you an idea about its reliability.
Get Adobe Flash player
Source Interlink Media © 2009 Car Craft,
Source Interlink Media
All rights reserved. WEB-050