Car Craft Magazine Homepage Car Craft

P156197 Image Large

P156197 Image Large

Ultimate Malibu LT1 Swap
To install the S&P fuel rail adapters, we pulled the retaining clip off the regulator on the return side of the fuel rail and used a Torx socket to remove the support bracket. Since the bracket is in an awkward position, we placed the socket onto a 1/4-inch wrench and taped it to avoid dropping it. Once we cut the feed line with a tube cutter, we were able to affix the new rail adapter and the supplied AN-6 lines. View Related Article
P156150 Image Large P156186 Image Large P156187 Image Large P156188 Image Large P156189 Image Large P156190 Image Large P156191 Image Large
P156192 Image Large P156193 Image Large P156194 Image Large P156195 Image Large P156196 Image Large P156197 Image Large P156198 Image Large
P156199 Image Large P156200 Image Large

 

Get Adobe Flash player