This is the path of the main serpentine belt that was in the kit. The part number is 2A046-988 for the main belt and 2A046-605 for the supercharger belt. For roadside emergencies, we now carry a 1/2-inch breaker bar to release the tensioner on the main belt system. The supercharger belt requires an 11/16-open-end wrench for the two primary-adjusting plate bolts and a slim, 5/8-inch open end for the bolt that is behind the idler pulley. This photo also came in handy when the idler pulley came loose and tossed the belt in the middle of nowhere.