Car Craft Magazine Homepage

P77260 Image Large

1. This Old House—not! All that’s needed to set toe and camber is a 2x4 board with a slightly angled nail driven into one end, a tape measure, and a carpenter’s level. The board performs two functions: It acts as a base for the level and (with the nail) also serves as a scribe.
At-Home Alignment Made Easy

 1. This Old House—not! All that’s needed to set toe and camber is a 2x4 board with a slightly angled nail driven into one end, a tape measure, and a carpenter’s level. The board performs two functions: It acts as a base for the level and (with the nail) also serves as a scribe.  View Related Article

 

 

Car Research Guide