|
6. To complement the new clutch, we installed a B&M short throw shifter to eliminate missed shifts when we have our foot on the pedal. We started by using a Dremel tool to clear out some of the plastic to get at the upper shifter-boot bolts. Just make sure you don’t cut too close to the clip mounts, or you’ll never get the plastic cover to seat correctly again. Remove the shifter boot and mounting bolts and take out the stock assembly. Then check the plastic bushing (arrow) for cracks. If all’s well, scrape the mounting area, apply some RTV, and install the trick new B&M shifter. View Related Article
|
|