How to Fix Your Dragging Brakes
|
Slide the hat/rotor back onto the wheel studs, clip the pads into the caliper, and put the caliper on the mounts. Bolt the caliper in place. This is a good time to check that the caliper is centered on the rotor by measuring the opening on each side of the rotor face (the measurements should be within 0.05 inch of each other). If the caliper is not centered, use shims to properly position the caliper around the rotor. View Related Article
|
|
Chevy Corvette Research
Explore the world with a new Chevy Corvette. Compare the Corvette with other submodels and find all you need for your car buying needs. It has had 0 vehicle recalls, which can give you an idea about its reliability.
|
|