Carburetor Installation
Carefully route the fuel hose up the front side of the block to the fuel inlet. Make sure it is away from the exhaust or any sharp edges that could rub through. Also, keep an eye on the fan and other pulleys. The Edelbrock carb doesn’t have an internal fuel filter, so you have to put one in the fuel line. A few plastic zip-ties or a hose clamp will keep the line secure. If you plan on running at the dragstrip, remember that the NHRA allows no more than 12 inches of rubber fuel line on the entire car. You may need to buy and bend some hardline. View Related Article
|
|