Some guys who don't really dig Bufords like to overly stress the "ick" in Buick. Bill Wojcik isn't one of those guys-especially when it comes to '66-'67 Skylarks like this '67 GS400: "My mother owned a '67 GS400 when I was young. I took my driver's license test in it." In a successful attempt to relive those days, Bill scored this car for a grand. Another 13 G's made his GS good enough to be feature worthy at the '98 CC Summer Cruise in St. Paul-right next door to where Bill resides in Minneapolis.Some guys who don't really dig Bufords like to overly stress the "ick" in Buick. Bill Wojc While Bill latched onto the GS for $1,000, it was pretty much a corncob at the time of purchase. These photos show he had his hands plenty full in the form of a complete body-off redo.While Bill latched onto the GS for $1,000, it was pretty much a corncob at the time of pur Stance is all about a set of Weld Pro Stars (15x3.5s in front and 15x8s out back) with Mickey Thompson skinnies up front and BFG P275/60R15 Drag Radials on the smoky end. They've been put to good use on the strip where Bill has run a 12.91 at 103 mph. The mostly stock front suspension has urethane bushings and Competition Engineering 90/10 shocks, and one coil is removed from each spring. The rear is also basic stuff with CE 50/50 shocks, urethane bushings, and reinforced upper and lower control arms.Stance is all about a set of Weld Pro Stars (15x3.5s in front and 15x8s out back) with Mic Stance is all about a set of Weld Pro Stars (15x3.5s in front and 15x8s out back) with Mickey Thompson skinnies up front and BFG P275/60R15 Drag Radials on the smoky end. They've been put to good use on the strip where Bill has run a 12.91 at 103 mph. The mostly stock front suspension has urethane bushings and Competition Engineering 90/10 shocks, and one coil is removed from each spring. The rear is also basic stuff with CE 50/50 shocks, urethane bushings, and reinforced upper and lower control arms.Stance is all about a set of Weld Pro Stars (15x3.5s in front and 15x8s out back) with Mic By Miles Cook Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!