Car Craft
Click here to find out more!

Mean Green

Chris Stratmann's '67 Camaro

Car Craft Q&A

Car Craft: How long did it take you to build the '67?

Chris Stratmann: Close to 10 years, but it really depends on how you look at it, since I spent the majority of the time gathering parts. I originally purchased the Camaro as a roller back in 1990 and started to collect the exterior parts. It wasn't until 1995 or 1996 that I focused more on the engine work.

CC: Any particular reason you went with a fuel-injection setup?

CS: I just really wanted to follow through with the high-tech theme while retaining the factory look.

CC: Was the Holley Commander 950 difficult to install or tune?

CS: Pretty easy actually. I already had the Holley Pro-Strip Annihilator ignition, so the Commander 950 was completely compatible and literally plugged right in. As for tuning, Holley has numerous fuel maps on its Web site that you can download, which made tuning a breeze. Matter of fact, they had a basic tune for a supercharged small-block Chevy putting out 14 pounds of boost. I tried it and the engine fired right up!

CC: Are there any additional modifications currently in the works?

CS: Not really. I recently upgraded to the Holley race software in order to tune with a wide-band oxygen sensor, but otherwise, I've been driving and enjoying it every chance I can.

The Details

Car: '67 Chevy Camaro
Owner: Chris Stratmann, Topeka, Kansas
Engine: 383ci small-block
Heads: Aluminum AFR 195, 2.08/1.60-inch intake/exhaust valves, 1.6:1 Comp Cams roller rockers
Induction: Holley Commander 950 EFI system
Power adder: ProCharger P600B Supercharger, ProCharger intercooler
Camshaft: Ultradyne hydraulic roller, 234/244 degrees duration at 0.050-inch lift, 0.635/0.635-inch lift
Transmission: TCI TH400, 10-inch 3,800-stall TCI torque converter
Rearend: Ford 9-inch, Richmond 4.30:1 gears, Moser 31-spline axles
Front suspension: HAL coilover, HAL 12-way adjustable shocks
Rear suspension: monoleaf spring, HAL 12-way adjustable shock
Brakes: Wilwood 11-inch disc, front; Ford 11-inch drum, rear
Wheels and tires: Wheel Vintiques 15x6 Rallyes with P205/70R15 BFGoodrich Radial TAs, front; Wheel Vintiques 15x8 Rallyes with Mickey Thompson 28x11.5-15 ET Streets, rear
Body mods: Shaved side mirrors and removed front bumper
Paint: Dupont Rally Green with white stripes
Cost to build: $30,000

Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
0 comments
Car Craft