Car Craft Magazine Homepage

Car Craft Community

Join our online Custom, Classic and Restored Car Community to interact with other automotive enthusiasts in our blogs and forums, ask questions, help other members, and much more.
Get a FREE no-hassle price quote on any new car.

Glad's Blog
CC/Rambler drag times
CC/Rambler Posted May 9 2008 06:48 PM by GLAD

 Rambler runs 7.40s at Irwindale.      

Read full blog
Filed under: Editorials  |  Comments (1)


• Get a Free Quote • Find a Local Dealer
Glad's Blog
CC/Rambler 401
CC/Rambler Posted May 8 2008 08:48 AM by GLAD

 CC/Rambler 401

Read full blog
Filed under: Editorials  |  Comments (3)

Free Poster Can Cure Welding Troubles

Hobart Brother Welding Poster Posted May 8 2008 07:10 AM by sigillbe

 Hobart Brothers offers the cure to common stick welding troubles. The poster illustrates common weld defects, their causes and solutions and is available free of charge in Spanish and English.

Read full blog
Filed under: Miscellaneous, How-to Help  |  Comments (0)

GM and K&N Bring You the Chance to Win

K&N Horsepower Challenge Posted April 24 2008 06:48 AM by sigillbe

 Eight K&N Horsepower Challenge Sweepstakes finalists will receive a trip for two to the Summit Racing Equipment NHRA Nationals and one finalist will walk away with a new Pontiac G6 GXP coupe courtesy of Pontiac.

Read full blog
Filed under: Auto News, Upcoming Events  |  Comments (0)

Car Craft Forum

WHY DO 2 VALVE HEADS HAVE 4 VALVE RELEIFS????
Nobody I ask seems to know. The most common flat top pistons have 4 releifs for a head with only 2... more
How do i make my Skylark louder?
I have a 68 Skylark and its got a rebuilt 350-2 in it, and quite frankly its a bad ass car, but i... more
what can i do to make my 305 pull like a train?
I have a firebird with a chevy 305 in it. I felt like the engine was way underpowered for the car... more
detonation causes
I have a 1978 chevy small block 400 with 11:1 compression, forged pistons with the cylinders bored... more
Electric cooling fan help!
I'm in the middle of completing my LT1 swap into my 78' Malibu, and I really need some advice on... more
Colormatching Textured Handles
Hello people: I'm new to carcraft and a "newbie starter" to spraygun painting. Please try not to... more
Does Spending The *** Ever Stop????
Is it just me or does spending money on your hot rod ever stop. A hundred here five hundred there a... more
power to mannual brakes question???????
I have a 77 camaro that I switched to mannual brakes. I still have the factory rear drums and disk... more
Made to order steel rims
Can anyone tell me where I might find a shop that can make steel rims to my off-set... more
fastest you've driven on our nation's highways/byways?
145ish in my bird on route 495 in MA... more
auto to manual trans
i have a 1970 buick 455 out of a station wagon .it is set up for an automatic trans. i would like... more
correct sparkplugs.....need help!!
i have a 355 that every so often has some run on.the timing is @ 34* and everything else works... more
Sinking intake valves deep into the bowl
Recently I posted a question about intake valve stems longer thqan the exhaust. I just discovered... more
This Guys Garage
Come on guys, SUMMIT RACING ? I spend way more than I should with these guys and really appreciate... more
57-64 BOP rear gears
Somwhere out there I read an article recently that a company is reproducing new ring and pinion... more

Car Research Guide

-  Dodge Charger
-  Chevrolet Corvette
-  Pontiac GTO
-  Chevrolet Monte Carlo
-  Mercury Cougar
-  Ford Mustang